Search Results for dnsmasq wpad

Setup WPAD on EdgeRouter

Previously, I wrote Setup WPAD on Asus Merlin. Similar on EdgeRouter. 1 Configure Domain name. System

set system domain-name int.sskaje.me

1	set system domain-name int.sskaje.me

DHCP service

set service dhcp-server shared-network-name dhcp-lan  subnet 192.168.32.0/20 domain-name int.sskaje.me

1	set service dhcp-server shared-network-name dhcp-lan subnet 192.168.32.0/20 domain-name int.sskaje.me

2 Prepare wpad.dat I don’t have wpad.dat deployed on my router, but an internal Ubuntu server with nginx as httpd, IP 192.168.36.20. wpad.dat is located to default server root, if you have your custom, make … Continue reading “Setup WPAD on EdgeRouter”

Setup WPAD on Asus Merlin

I have flashed my Asus RT-AC68U to Merlin, SSH has been enabled. This is a tutorial about setting up WPAD on Asus router. Environment Router: RT-AC68U Firmware: Merlin 380.59 Router IP: 192.168.1.1 Local Domain: my.home.local Router Admin Account: admin DHCPd: dnsmasq Prepare SSH to router, and check files.

ssh admin@192.168.1.1

1	ssh admin@192.168.1.1

Web root is set to /www, … Continue reading “Setup WPAD on Asus Merlin”

OpenVPN Site-to-Site VPN between Asus Merlin And Ubnt EdgeRouter

前言 Network Topology RT-AC68U 使用PPPoE拨号上网，但是分配的IP是100.64.204.111, 看着像公网IP实际却是Carrier-grade NAT. 现在需要将RT-AC68U与一台在公网的EdgeRouter使用OpenVPN Site-to-Site连接起来，并在RT-AC68U端实现policy-based routing。需要让RT-AC68U下的所有设备能访问EdgeRouter LAN的网络，并根据需求透过VPS访问指定互联网。本实验参考下列文章： Set up OpenVPN Site-to-Site on UBNT EdgeRouter Lite EdgeRouter OpenVPN Connectivity Monitor EdgeRouter 策略路由实现分析 EdgeRouter Policy Based Routing Using DNSMASQ IPSET Incoming search terms:asus merlinmerlin openvpn policy basedunderkdfasus ac88 site to site openvpnrunningafxopenvpn pbr iptables tagsofficesn8nosev67nervous8xdleft1i1golden2w5gettingpohdryu82Create NAT on tunnelcountryljycopyozjcontinued8x6boxz65been1nnasus openvpnLink to this … Continue reading “OpenVPN Site-to-Site VPN between Asus Merlin And Ubnt EdgeRouter”

基于SNIProxy的路由端网络流量定制分发方案

标题感觉很高大上，其实写得乱七八糟。前序文章： SNIProxy Bind Outgoing Interface Build SNIProxy Debian Package for EdgeRouter Ubnt EdgeRouter Lite 和 EdgeRouter X 上安装使用SNIProxy 不急，上边三篇可能会在本文内提及。首先，sniproxy不解释了，但是如标题所属，sniproxy的版本不支持我要的功能，所以我就fork然后改了。具体思路参考上述第一个链接。接下来，直接进入正题。按之前的玩法，我使用路由表来控制流量。这是一个很典型，也很正确的做法；但是也是一个很不好用的玩法。参考文章：Set up OpenVPN Site-to-Site on UBNT EdgeRouter Lite, EdgeOS PPTP VPN客户端配置 PS：我维护了一份自己的路由表，地址在 https://ip.rst.im/blocks/sskaje 为了让定制化程度高一些，我配了一个Socks代理，实际上是在vpn对端配置的，本地路由做了个DNAT，转发过去了。这样我就可以用firefox＋foxyproxy实现本地定制化规则。参考文章：UBNT VPN + Socks5 代理和 Set up dante-server on Ubuntu 后来考虑到上述用起来麻烦，又趁着回老家的时候，在家里的ac68u merlin上实践了下WPAD，不过没有在自己家里的edgerouter上搞。参考文章：Setup WPAD on Asus … Continue reading “基于SNIProxy的路由端网络流量定制分发方案”